HP Dx5150 HP Business Desktop dx5150 Series Service Reference Guide, 1st Editi - Page 175

E Memory AMD-Based Systems Computers equipped with AMD-based processors come with Double Data Rate-Synchronous Dynamic Random Access Memory (DDR-SDRAM) Dual Inline Memory Modules (DIMMs). DIMMs The memory sockets on the system board can be populated with up to four industry-standard DIMMs. These memory sockets are populated with at least one preinstalled DIMM. To achieve the maximum memory support, you can populate the system board with up to 8GB (1-Gbit Technology) of memory configured in a high-performing dual channel mode. ✎ The memory available may be limited by the operating system. DDR-SDRAM DIMMs For proper system operation, if the computer supports DDR-SDRAM DIMMs, the DIMMs must be: ■ industry-standard 184-pin ■ unbuffered PC3200 400 MHz-compliant ■ 2.5 volt DDR-SDRAM DIMMs. The DDR-SDRAM DIMMs must also: ■ support CAS latency 3 (CL = 3) ■ contain the mandatory JEDEC SPD information In addition, the computer supports: ■ 128Mbit, 256Mbit, 512Mbit, and 1Gbit non-ECC memory technologies ■ single-sided and double-sided DIMMS ■ DIMMs constructed with x8 and x16 DDR devices; DIMMs constructed with x4 SDRAM are not supported ✎ The system will not start if you install unsupported DIMMs. Service Reference Guide, dx5150 361685-001 E-1