HP Dx5150 HP Business Desktop dx5150 Series Service Reference Guide, 1st Editi - Page 86
Processor - mt updates
UPC - 882780485433
View all HP Dx5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.15 Processor 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). 2. Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Section 6.3, "Access Panel"). 3. Remove the heatsink (Section 6.14, "Heatsink") 4. Rotate the ZIF socket handle to its fully open position 1. 5. Carefully lift the processor from the socket 2. To install a new processor: 1. Insert the processor into the socket. 2. Secure the locking lever. If reusing the existing heatsink, go to step 3. If using a new heatsink, go to step 5. 3. If reusing the existing heatsink clean bottom of the heatsink and apply the thermal grease found in the spares kit to the top of the processor. 4. Clean the bottom of the heatsink with the provided alcohol pad and place it atop the processor. Go to step 6. 5. If using a new heatsink, remove the protective covering from the bottom of the heatsink and place it in position atop the processor. 6. Secure the heatsink to the system board and system board tray with the two captive screws and attach the heatsink control cable to the system board. ✎ After installing a new processor onto the system board, always update the system ROM to ensure that the computer is using the latest version of the BIOS. You can find the latest system ROMPaq on the Web at: http://h18000.www1.hp.com/support/files. 6-26 361685-001 Service Reference Guide, dx5150