HP LH4r HP Netserver LH 6000 Installation Guide - Page 128
Setting the HP NetServer's Boot Passwords
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Chapter 10 Configuring the HP NetServer The "System Time" field is highlighted by default when the "Configuration" menu is selected. This field actually consists of three sub-fields, enclosed in brackets [xx:xx:xx]: hours to the left (24-hour clock), minutes in the middle, and seconds to the right. 4. Type in the hour and press Enter to move to the minutes' field. 5. Type in the minutes and press Enter again to move to the seconds' field. 6. Type in the seconds and press Enter, then use the arrow keys to leave this field. 7. Use the up/down arrow keys to scroll to the System Date field and enter the system date in the field. The dates are entered in the "System Date" field in the same way as the time is entered in the "System Time" field. This field also has three separate sub-fields for month, day, and year enclosed in brackets [xx/xx/xxxx]. 8. Type in the month and press Enter to move to the day field. 9. Type in the day and press Enter again to move to the year field. 10. Type in the year and press Enter, and then use the arrow keys to leave this field. 11. Use the right-arrow or left-arrow key to select the Exit menu. 12. Choose Exit Saving Changes from the list of exit options, then press Enter. A dialog appears and asks you to confirm your decision. 13. Choose Yes and then press Enter. Then the HP NetServer reboots. Setting the HP NetServer's Boot Passwords The HP NetServer can have separate administrator and user password. The user password is limited in access once booted. To configure the HP NetServer for passwords and to require a password during boot-up, perform following procedure. 1. If not already in the Setup Utility, boot or reboot the system and press F2 when prompted. 120