HP LH4r HP Netserver LH 6000 Installation Guide - Page 38
Removing the LH 6000r Rack Mount Covers
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 3 Opening and Closing the HP NetServer Removing the LH 6000r Rack Mount Covers CAUTION Do NOT operate the NetServer for more than 30 minutes with any cover (including power supplies and disk drives) removed. Otherwise, damage to system components may result due to improper cooling airflow. 1. Extend the anti-tip foot from under the front of the rack or insure that the anti-tip feature is installed. WARNING The anti-tip foot must be extended or the anti-tip feature must be installed to prevent the rack and NetServer from tipping over, which could damage the NetServer and injure people. Leveler Feet Anti-Tip Foot Figure 3-1. Rack Anti-tip Foot 2. Remove the bezel from the front of the NetServer by swinging the bezel open (past 90 degrees) until it releases from the three posts on the bezel hinge (see Figure 3-2). 30