HP LH4r HP Netserver LH 6000 Installation Guide - Page 63
The System Board Assembly weighs approximately 20 lbs.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 5 Installing Additional Memory 5. Remove the two screws securing the system board assembly to the chassis (see Figures 5-2 and 5-3). 6. Unlatch the blue retaining latches to release the assembly. CAUTION Wear a wrist-strap and use a static-dissipating work surface connected to the chassis when handling components. Ensure the metal of the wrist strap contacts your skin. 7. Pull the assembly out until it clears the chassis guides. CAUTION The System Board Assembly weighs approximately 20 lbs. (9 kgs). Support it at the bottom as it is removed from the chassis. Figure 5-2. Removing the System Board Assembly from the LH 6000r NetServer 55
Chapter 5
Installing Additional Memory
55
5.
Remove the two screws securing the system board assembly to the chassis
(see Figures 5-2 and 5-3).
6.
Unlatch the blue retaining latches to release the assembly.
CAUTION
Wear a wrist-strap and use a static-dissipating work surface
connected to the chassis when handling components. Ensure
the metal of the wrist strap contacts your skin.
7.
Pull the assembly out until it clears the chassis guides.
CAUTION
The System Board Assembly weighs approximately 20 lbs.
(9 kgs). Support it at the bottom as it is removed from the
chassis.
Figure 5-2. Removing the System Board Assembly from the LH 6000r
NetServer