HP LH4r HP Netserver LH 6000 Installation Guide - Page 14
Configuring the HP NetServer
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Chapter 1 Setting Up the HP NetServer LH 6000/6000r 14. Power up the HP NetServer. Refer to Chapter 2, "Controls, Ports, and Indicators." Go to the next section, "Configuring the HP NetServer." Configuring the HP NetServer 1. Turn on the monitor. Press the power-on button on the HP NetServer, and press the eject button on the CD-ROM drive. Place the HP NetServer Navigator CD-ROM in the drive and close the drive. Press the Reset button. If the system fails to restart, follow the instructions on the screen. NOTE To fully configure the HP NetServer, all the rack components must be cabled and online (though not necessarily installed in the rack.) If printed instructions are required; a local or network printer must be connected. Refer to Chapter 10, "Configuring the HP NetServer." 2. When HP Navigator starts, you can set the time and date, and change the display language. 3. Read the README File: Select "README File" from the HP Navigator Main Menu. The README file contains the latest information to help you install your HP NetServer. 4. Run DiagTools: To verify the NetServer hardware as shipped, run DiagTools by first creating a DiagTools flexible diskette(s) from the HP NetServer Navigator CD-ROM. For more information on how to use DiagTools to detect all processors and memory on the system board, refer to the online NetServer DiagTools Error Reference and User Guide. 5. Install Information Assistant: It is easier to use Information Assistant from a standalone workstation than from the NetServer where you are performing the installation. Install Information Assistant from the HP NetServer Online Documentation CD-ROM. Go to Chapter 11, "Information Assistant," for information on how to access your online documentation. 6