HP LH4r HP Netserver LH 6000 Installation Guide - Page 152
The configuration has been cleared. Set the, Clear Config switch to the OFF position, before
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Chapter 12 Troubleshooting Refer to Figure 12-1 and the Technical Reference Card inside the top cover. ON 12345678 CPU Speed CPU Speed CPU Speed Clear Config Clear Password Not Used Figure 12-1. System Board Assembly and Configuration Switch 5. Move the configuration memory switch, switch 5 on the system board, to the "ON = CLEAR CONFIG" position. 6. Plug in the power cords, and turn on power to the HP NetServer. The following message appears: The configuration has been cleared. Set the Clear Config switch to the OFF position before rebooting. 7. Turn off power to the HP NetServer and unplug the power cords. 8. Return switch 5 on the system board to the OFF position. 9. Follow the procedure in Chapter 3, "Opening and Closing the HP NetServer," for closing up the server. 10. Reconnect power and cables. 11. Restore HP NetServer to normal operation. 144