HP LH4r HP Netserver LH 6000 Installation Guide - Page 84
Setting the Processor Speed
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Chapter 7 Installing Additional Processors 19. Reconnect cables and power cords to the NetServer. 20. Follow the procedure in Chapter 3, "Opening and Closing the HP NetServer," for closing up the server. 21. Restore HP NetServer to normal operation. Setting the Processor Speed 1. Determine the processor speed setting from Table 7-1. ON 12345678 CPU Speed CPU Speed CPU Speed Clear Config Clear Password Not Used Figure 7-6. Location of Configuration Switch on System Board 2. Set the speed switches of the configuration switch as listed in Table 7-1. (Use a small, flat-blade screwdriver or similar tool.) 76
Chapter
7
Installing Additional Processors
76
19.
Reconnect cables and power cords to the NetServer.
20.
Follow the procedure in Chapter 3, "Opening and Closing the HP
NetServer," for closing up the server.
21.
Restore HP NetServer to normal operation.
Setting the Processor Speed
1.
Determine the processor speed setting from Table 7-1.
CPU Speed
CPU Speed
CPU Speed
Clear Config
Clear Password
Not Used
1
2
3
4
5
6
7
8
ON
Figure 7-6. Location of Configuration Switch on System Board
2.
Set the speed switches of the configuration switch as listed in Table 7-1.
(Use a small, flat-blade screwdriver or similar tool.)