HP LH4r HP Netserver LH 6000 Installation Guide - Page 26
FW Info Firmware Information Menu, System Info Menu
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 2 Controls, Ports, and Indicators FW Info (Firmware Information) Menu The FW Info menu displays the versions of all firmware components in the system. 1. Select FW Info from the Main Menu. A display similar to the one shown below appears on the HP NetServer's front panel display. **FW Info*** 2. Use the arrow buttons to scroll down through the rest of the information. 3. Press Escape to return to the Main Menu. System Info Menu The System Info menu displays the HP NetServer's configuration information. Information includes the number, speed, and type of CPUs, cache information, and the amount of RAM on each memory board. 1. Select System Info from the Main Menu. A display similar to this appears on the HP NetServer's status screen. **System Info*** No. Of CPUs=x 2. Use the down-arrow button to scroll through the rest of the information. A full screen of the display would appear as shown below, but the actual display is still limited by two viewing lines at time. **HW Sys Info*** No. Of CPUs=x CPU speed 500MHz CPU type PIII Xeon LFT CPU1 stepping xx LFT CPU2 stepping xx RFT CPU1 stepping xx RFT CPU2 stepping xx L2 Cache xxxx KB Mem slot1 xxxxMB Mem slot2 xxxxMB 3. Press Escape to return to the Main Menu. 18