HP Media Center m1200 Getting Started Guide - Page 56
Retasking front panel connectors, Disabling digital audio output with Sound Effect Manager optional
View all HP Media Center m1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
8 Connect the speaker system audio cable plugs into the connectors on the front of your PC. The panel display highlights a cable that is properly inserted in a connector. 9 Close the window. Retasking front panel connectors The microphone connector and the headphone connector on the front of the PC can be retasked to perform different functions. 1 Follow steps 1 through 7 of the procedure, "Using the Audio Wizard." 2 When you plug in a cable, the wizard asks you to select the device you plugged in from a list. 3 Close the window. Disabling digital audio output with Sound Effect Manager (optional) To disable digital audio output: 1 Follow steps 1 through 6 of the procedure, "Configuring Audio Output with Sound Effect Manager" on page 51. 2 Click the Digital Audio button. Select No digital output (you can also select Digital-in to Digital-out pass through mode). 3 Close the window. If you select Enable digital audio output, the microphone volume setting becomes not muted, the recording source is fixed in Stereo Mix, and if you place the microphone too close to the speakers, feedback can occur. 52 HP Media Center PC Getting Started Guide