HP Workstation x4000 hp workstation x4000 - Technical Reference manual - Windo - Page 14
Feature, Description, HP x4000 Workstation Feature Set,
![]() |
View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
System Overview HP x4000 Workstation Feature Set Feature Rambus Memory on Memory Expander Card (MEC) P64H Hub to 64-bit PCI module Interface Controller Hub BIOS Accessory Card Slots LAN Port On-board SCSI Controller Chip Description Plugs into the system board and supports: • 400 MHz operation delivering up to 3.2 GB/s memory bandwidth using two expansion channels operating in lock step • Up to 8 PC800 RIMMs (see "Upgrading Memory on the 8-RIMM MEC" on page 159 for memory loading instructions) Supports 64-bit, 66 MHz PCI bus containing: • Two 64-bit, Two PCI connectors 66 MHz PCI connectors • On-board SCSI controller ICH2 Hublink to I/O controller modules supports: • Three 32-bit, 33 MHz PCI connectors • Two external USB ports • Two ATA 100 IDE controllers • One firmware hub interface • One AC97 audio interface Based on Phoenix core, including 4 MB flash. • One AGP Pro 110 4X connector • Three 5V, 33 MHz, 32-bit Peripheral Component Interconnect (PCI) connectors • Two 3.3V, 66 MHz, 64-bit PCI connectors The Intel 82550 10/100BaseT LAN port interfaces to the system via the 33 MHz, 32-bit PCI bus. Wake on LAN is supported. The LSI SYM43C1010R has two Ultra 160 SCSI controllers to support two internal wide connectors: • Ribbon cable up to SCSI drives • Ribbon cable to external SCSI connector 14 Chapter 1
![](/manual_guide/products/hewlettpackard-workstation-x4000-hp-workstation-x4000-technical-reference-manual-windows-linux-a6068ie001-e0601-1ad8c57/14.png)