HP Workstation x4000 hp workstation x4000 - Technical Reference manual - Windo - Page 54
Serial port A, Parallel Port, Graphics Aperture, The Enable Master and Latency Timer fields are
View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
System BIOS and Resources HP Setup Program Table 4-2 Advanced Menu Field Description Integrated I/O Ports Integrated Audio AGP Pro 110 4X Slot (Graphics) PCI Device Slot # Lets you configure both the integrated serial and parallel ports. Serial port A, Serial port B, or Parallel Port: These fields contain three choices. Auto lets the BIOS or a PnP OS configure the port. Enabled lets you set each resource. Disabled leaves the port disabled by the BIOS, but a PnP OS can still enable it. Parallel Port Mode: You can set the parallel port mode to Output only, Bi-directional, EPP, or ECP. Lets you configure the integrated PCI audio controller. These fields are identical to the Integrated SCSI Controller fields listed above except there is no Option ROM Scan. Lets you configure your AGP Pro 110 4X slot. The first two fields describe the installed graphics card. The Enable Master and Latency Timer fields are described in the Integrated SCSI Controller entry above. Graphics Aperture: This field contains a pull-down menu that lets you choose the size of the graphics aperture for the AGP video device. Lets you configure a PCI device plugged into the specified slot. The first two fields describe the installed PCI card. The next three fields are identical to the Integrated SCSI Controller fields listed above. 54 Chapter 4