HP Workstation x4000 hp workstation x4000 - Technical Reference manual - Windo - Page 48

System BIOS, See System Board Switches

Get HP Workstation x4000 PDF manuals and user guides View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

System BIOS and Resources System BIOS 5. Set switch 2 on the system board to ON. See "System Board Switches" on page 28. 6. Insert the floppy disk into the floppy disk drive. 7. Reconnect the power cord, and turn on the Workstation. 8. The workstation boots from the floppy disk, then flashes the BIOS. During the flash process, the screen remains blank. When you hear one long beep, the recovery process is finished. 9. Turn off the Workstation. Remove the floppy disk from the drive. Remove the power cord and display cables, and remove the cover. (You must press the pwoer buttong for 5 seconds to get the system to power down.) 10. Set switch 2 back to OFF. 11. Replace the cover, reconnect the power cord, and reboot the Workstation. 48 Chapter 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
System BIOS and Resources
System BIOS
Chapter 4
48
5.
Set switch
2
on the system board to
ON
. See “System Board Switches”
on page 28.
6.
Insert the floppy disk into the floppy disk drive.
7.
Reconnect the power cord, and turn on the Workstation.
8.
The workstation boots from the floppy disk, then flashes the BIOS.
During the flash process, the screen remains blank. When you hear
one long beep, the recovery process is finished.
9.
Turn off the Workstation. Remove the floppy disk from the drive.
Remove the power cord and display cables, and remove the cover. (You
must press the pwoer buttong for 5 seconds to get the system to power
down.)
10.Set switch 2 back to
OFF
.
11.Replace the cover, reconnect the power cord, and reboot the
Workstation.