HP Workstation x4000 hp workstation x4000 - Technical Reference manual - Windo - Page 150
Replacing the Cover and Front Bezel
View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Installing or Replacing Parts and Accessories Cover and Front Bezel Replacing the Cover and Front Bezel To replace the cover and front bezel: 1. Ensure that all internal cables are properly connected and safely routed. 2. If necessary, replace the front bezel: a. Align the plastic quarter rounds on the inside of the bezel with the sheet metal sockets on the right side of the chassis. b. Rotate the bezel into position and verify that the plastic tabs on the left side of the bezel click into position on the Workstation chassis. The bezel should be flush against the Workstation. 3. Standing at the back of the Workstation, lower the cover onto the chassis (aligning the guide rail on the bottom inside edge of the cover with the bottom edge of the Workstation chassis). 4. Shut the cover ensuring that the guides on the top of the cover slide into the rails at the top of the chassis. 5. Slide the cover forward, then tighten the two thumbscrews. 6. If required, lock the cover using the key provided. 148 Chapter 10