HP Workstation x4000 hp workstation x4000 - Technical Reference manual - Windo - Page 176

NOTE NOTE Installing or Replacing Parts and Accessories CD-ROM, CD-RW or DVD If you installed a CD-RW, you must install the software that came with the drive before you can write to the device. The CD-ROM driver is pre-loaded and is used by the CD-ROM, CD-RW, and DVD to read standard CD-ROM format media. Load the Software Applications for Your CD-RW If you have a CD-RW in your Workstation, you must install the Direct CD and Easy CD Creator applications located on the Applications CD-ROM before you can use the write/re-write functionality of the drive. To install these applications: 1. Put the Applications CD-ROM in your CD-RW drive. Installation begins automatically. 2. When the installation window appears, a dialog box appears asking you to select your language. Select the language you wish to install. 3. Select one of these choices and follow the on-screen directions for installation: • Easy CD Creator • Direct CD 4. When the installation wizard returns, you must restart your system before installation is complete. To restart your system: a. Select Exit. b. Remove the Applications CD-ROM and click Yes to restart your system. Repeat these instructions to install the second application. You must restart your system between each installation in order for both applications to install correctly. If you do not install either Easy CD Creator and Direct CD, you can only use the CD-RW drive's read functionality. 174 Chapter 10