HP Workstation x4000 hp workstation x4000 - Technical Reference manual - Windo - Page 221
Reseat PCI and AGP I/O cards., Reseat the memory expander card.
View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Troubleshooting Understanding the Diag LEDs Table 11-1 Diag LED Patterns (R = Red, Y = Yellow, G = Green, q = Off) Pattern Description qYRY 12V power circuitry error. qYRG 2.5 V RDRAM power circuitry error. Possible Solutionsa 1. Reseat PCI and AGP I/O cards. 2. Try removing the I/O cards one at a time, restarting the Workstation each time. If it appears the error is being caused by one card, replace the card. 3. Replace the power supply as described in "System Memory" on page 159. 4. Replace the system board as described in "System Board" on page 186. 1. Reseat the memory expander card. 2. If the memory expander card has a separate voltage regulator module, reseat or replace the voltage regulator module. 3. Replace the RIMMs or CRIMMs as described in "System Memory" on page 159. 4. Replace the memory expander card. Chapter 11 221