HP Workstation x4000 hp workstation x4000 - Technical Reference manual - Windo - Page 155
Installing the Chassis Beam Assembly, MEC Retainer Clip
![]() |
View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Installing or Replacing Parts and Accessories Chassis Beam Assembly Installing the Chassis Beam Assembly To install the chassis beam assembly: 1. Hook the chassis beam assembly to the left side of the chassis and rotate it down over the MEC and the graphics card making sure the MEC and graphics card retainer clips are centered on the cards as shown in Figure 10-6 and Figure 10-7. CAUTION Make sure the retaining clips slide easily over the cards, or the clips may put undue pressure on the card connectors. Figure 10-6 2. Replace the screw that holds the chassis beam assembly in place. MEC Retainer Clip Retaining clip on MEC. Chapter 10 153
![](/manual_guide/products/hewlettpackard-workstation-x4000-hp-workstation-x4000-technical-reference-manual-windows-linux-a6068ie001-e0601-1ad8c57/155.png)
Installing or Replacing Parts and Accessories
Chassis Beam Assembly
Chapter 10
153
Installing the Chassis Beam Assembly
To install the chassis beam assembly:
1.
Hook the chassis beam assembly to the left side of the chassis and
rotate it down over the MEC and the graphics card making sure the
MEC and graphics card retainer clips are centered on the cards as
shown in Figure 10-6 and Figure 10-7.
CAUTION
Make sure the retaining clips slide easily over the cards, or the clips
may put undue pressure on the card connectors.
2.
Replace the screw that holds the chassis beam assembly in place.
Figure 10-6
MEC Retainer Clip
Retaining clip
on MEC.