HP Workstation x4000 hp workstation x4000 - Technical Reference manual - Windo - Page 76
Chassis Intrusion, Pre-boot Device Test, PCI/AGP Power
View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Hardware Management (Monitoring and Reporting) Hardware Monitoring Chassis Intrusion Chassis intrusion is detected via the Winbond W83782D C_OPEN pin. There is an SDR (sensor data record) for the chassis intrusion event. If the hardware indicates an intrusion, the HMC clears the hardware latch in the Winbond, logs the event in the System Event Log (SEL), which is non-volatile storage, and sets the state of the NBA token for chassis intrusion based on the current chassis intrusion status. The BIOS queries the NBA token to determine if it should display a chassis intrusion message. It then clears the chassis intrusion status in the NBA token. Applications such as TopTools query for a chassis intrusion event by searching the SEL. Pre-boot Device Test The HMC detects presence of processors. The BIOS detects presence of memory and memory errors. If it is a condition that prevents the BIOS from completing POST, it notifies the HMC so that the HMC can display error LEDs on the front panel. PCI/AGP Power The BIOS detects presence and power consumption of PCI/AGP devices plugged in the system. It then passes this information on to the HMC, to detect overpower situations and to know whether it's possible to turn off the PCI fan to make the system quieter. 76 Chapter 5