HP Workstation x4000 hp workstation x4000 - Technical Reference manual - Windo - Page 71
General Firmware Information, Date/Time Initialization, SEEPROM Organization
View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Hardware Management (Monitoring and Reporting) General Firmware Information General Firmware Information Firmware processing is provided by QLogic's Zircon Lite chip and an auxiliary Winbond chip. The firmware implements industry standard IPMI Specification 1.0 with the following extensions: • BIOS configuration tokens • Additional hardware control • BIOS security KCS 1 and BT protocols are supported. Only KCS 1 is used during BIOS POST. BT is supported at run-time (after the operating system boots). Date/Time Initialization The Zircon Lite's date and time is initialized after each power-on by the BIOS. This enables accurate logging of timestamp information for events in the SEL. SEEPROM Organization There are three Atmel SEEPROMs attached to the main SMBUS for information storage. These contain the SEL, FRU, and HP NBA Tokens. The FRU stores the product model, serial number, and other chassis and system board information. Chapter 5 71