Hitachi DZ-HS903A Owners Guide - Page 156

Message Cause & Troubleshooting Write protected. The HDD or disc is write-protected. Use the Disc Check HDD/DVD. Navigation menu to release the protection. Reference page 113 *1 • This message may also appear if the disc is dirty. If this message appears when a recorded disc is recognized immediately after it is inserted, do not repair the disc; remove it and then use a soft cloth to clean off the dirt before using it. • This message may also appear when condensation occurs. In this case, do not repair the disc; turn the camcorder off, wait until it dries out, and then turn it on again. • If the repair message appears when you turn the camcorder on from off with a disc loaded after recording on it, select repair. • If the repair message appears when recording and playback are normally possible with another disc - and no condensation has occurred, and the disc is not dirty - select repair. *2 • This message may also appear if the disc is dirty. In this case, do not format the disc. Remove it and then use a soft cloth to clean off the dirt before using it. • This message may also appear when condensation occurs. In this case, do not format the disc; turn the camcorder off, wait until it dries out, and then turn it on again. • Formatting will delete all data on the disc. *3 • This message may also appear when the disc is dirty. Remove the disc and then use a soft cloth to clean off the dirt before using it. • This message may also appear when condensation occurs. Wait until the camcorder dries out, and then turn it on again. *4 • This message will appear when a single-sided disc is inserted the wrong way (upside down). Reinsert the disc correctly. (Insert the disc with the label printed surface facing toward the outside.) *5 • Do not insert a DVD-RW (VF mode)/DVD-R disc that has not been finalized into any DVD recorder. The disc may become unusable. Additional Information 156