IBM 7979B1U User Manual - Page 20

Integrated

Get IBM 7979B1U PDF manuals and user guides View all IBM 7979B1U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Table 1. Features and specifications Microprocessor: v Intel® Xeon™ FC-LGA 771 dual-core with 4 MB Level-2 cache or quad-core with 8 MB (2x4 MB) Level-2 cache v Support for up to two microprocessors v Support for Intel Extended Memory 64 Technology (EM64T) Note: v Use the Configuration/Setup Utility program to determine the type and speed of the microprocessors. v For a list of supported microprocessors, see http://www.ibm.com/servers/eserver/ serverproven/compat/us/ Memory: v Twelve DIMM connectors v Minimum: 1 GB v Maximum: 48 GB v Type: Fully buffered DIMM (FBD) PC2-5300 DIMMs only v Sizes: 512 MB, 1 GB, 2 GB, or 4 GB (when available), in pairs v Chipkill™ supported Drives: CD/DVD: IDE 24x CD-RW/ 8x DVD combination Expansion bays: v Hot-swap hard disk drive bays: SAS only. Number and size depend on the server model. One of the following configurations: - Six 3.5-inch drive bays (optional tape drive [SATA or SCSI] requires two of these bays) - Eight 2.5-inch drive bays and one tape-drive (SATA or SCSI) bay v One 5.25-inch Ultrabay Enhanced bay (CD-RW/DVD drive installed) Expansion slots: v Two PCI Express x8 slots (x4 lanes) on system board (low profile) v Support for either of the following optional riser cards: - Riser card with two PCI Express x8 slots (x8 lanes) (standard) - Riser card with two 133 MHz/64-bit PCI-X slots Hot-swap fans: v Standard: Five v Maximum: Ten - provide redundant cooling Hot-swap power supplies: 835 watts (100 - 240 V ac) v Minimum: One v Maximum: Two - provide redundant power Size (2 U): v Height: 85.4 mm (3.36 in.) v Depth: 705 mm (27.8 in.) v Width: 443.6 mm (17.5 in.) v Weight: approximately 21.09 kg (46.5 lb) to 29.03 kg (64 lb) depending upon configuration Integrated functions: v Baseboard management controller v Two Broadcom 10/100/1000 Ethernet controllers with Wake on LAN® support and TCP/IP Offload Engine (TOE) support v One RAID controller, active only when a 8k or 8k-l SAS controller is installed v One serial port v One serial-attached SCSI (SAS) controller v Seven Universal Serial Bus (USB) ports (two on front and four on rear of server, plus one internal), v2.0 supporting v1.1 v Two video ports (one on front and one on rear of server) v One internal serial ATA (SATA) connector for tape v Support for Remote Supervisor Adapter II SlimLine Note: In messages and documentation, the term service processor refers to the baseboard management controller or the optional Remote Supervisor Adapter II SlimLine. Video controller: v ATI RN50 video on system board v Compatible with SVGA and VGA v 16 MB DDR video memory ServeRAID SAS controller: v ServeRAID™-8k-l SAS Controller that supports RAID levels 0, 1, 10 (standard) v Upgradeable to ServeRAID-8k SAS Controller, 256 MB with battery backup, that supports RAID levels 0, 1, 1E, 5, 6, and 10 Environment: v Air temperature: - Server on: 10° to 35°C (50.0° to 95.0°F); altitude: 0 to 914.4 m (3000 ft). Decrease system temperature by 0.75°C for every 1000-foot increase in altitude. - Server off: 10° to 43°C (50.0° to 109.4°F); maximum altitude: 2133 m (7000 ft) - Shipment: -40° to +60°C (-40° to 140°F); maximum altitude: 2133 m (7000 ft) v Humidity: - Server on/off: 8% to 80% - Shipment: 5% to 100% Acoustical noise emissions: v Declared sound power, idle: 6.8 bel v Declared sound power, operating: 6.8 bel Heat output: Approximate heat output in British thermal units (Btu) per hour: v Minimum configuration: 1230 Btu per hour (360 watts) v Maximum configuration: 3312 Btu per hour (970 watts) Electrical input with hot-swap ac power supplies: v Sine-wave input (50-60 Hz) required v Input voltage range automatically selected v Input voltage low range: - Minimum: 100 V ac - Maximum: 127 V ac v Input voltage high range: - Minimum: 200 V ac - Maximum: 240 V ac v Input kilovolt-amperes (kVA) approximately: - Minimum: 0.29 kVA - Maximum: 1.00 kVA 4 System x3650 Type 7979: User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Table
1.
Features
and
specifications
Microprocessor:
v
Intel
®
Xeon
™
FC-LGA
771
dual-core
with
4
MB
Level-2
cache
or
quad-core
with
8
MB
(2x4
MB)
Level-2
cache
v
Support
for
up
to
two
microprocessors
v
Support
for
Intel
Extended
Memory
64
Technology
(EM64T)
Note:
v
Use
the
Configuration/Setup
Utility
program
to
determine
the
type
and
speed
of
the
microprocessors.
v
For
a
list
of
supported
microprocessors,
see
serverproven/compat/us/
Memory:
v
Twelve
DIMM
connectors
v
Minimum:
1
GB
v
Maximum:
48
GB
v
Type:
Fully
buffered
DIMM
(FBD)
PC2-5300
DIMMs
only
v
Sizes:
512
MB,
1
GB,
2
GB,
or
4
GB
(when
available),
in
pairs
v
Chipkill
™
supported
Drives:
CD/DVD:
IDE
24x
CD-RW/
8x
DVD
combination
Expansion
bays:
v
Hot-swap
hard
disk
drive
bays:
SAS
only.
Number
and
size
depend
on
the
server
model.
One
of
the
following
configurations:
–
Six
3.5-inch
drive
bays
(optional
tape
drive
[SATA
or
SCSI]
requires
two
of
these
bays)
–
Eight
2.5-inch
drive
bays
and
one
tape-drive
(SATA
or
SCSI)
bay
v
One
5.25-inch
Ultrabay
Enhanced
bay
(CD-RW/DVD
drive
installed)
Expansion
slots:
v
Two
PCI
Express
x8
slots
(x4
lanes)
on
system
board
(low
profile)
v
Support
for
either
of
the
following
optional
riser
cards:
–
Riser
card
with
two
PCI
Express
x8
slots
(x8
lanes)
(standard)
–
Riser
card
with
two
133
MHz/64-bit
PCI-X
slots
Hot-swap
fans:
v
Standard:
Five
v
Maximum:
Ten
-
provide
redundant
cooling
Hot-swap
power
supplies:
835
watts
(100
-
240
V
ac)
v
Minimum:
One
v
Maximum:
Two
-
provide
redundant
power
Size
(2
U):
v
Height:
85.4
mm
(3.36
in.)
v
Depth:
705
mm
(27.8
in.)
v
Width:
443.6
mm
(17.5
in.)
v
Weight:
approximately
21.09
kg
(46.5
lb)
to
29.03
kg
(64
lb)
depending
upon
configuration
Integrated
functions:
v
Baseboard
management
controller
v
Two
Broadcom
10/100/1000
Ethernet
controllers
with
Wake
on
LAN
®
support
and
TCP/IP
Offload
Engine
(TOE)
support
v
One
RAID
controller,
active
only
when
a
8k
or
8k-l
SAS
controller
is
installed
v
One
serial
port
v
One
serial-attached
SCSI
(SAS)
controller
v
Seven
Universal
Serial
Bus
(USB)
ports
(two
on
front
and
four
on
rear
of
server,
plus
one
internal),
v2.0
supporting
v1.1
v
Two
video
ports
(one
on
front
and
one
on
rear
of
server)
v
One
internal
serial
ATA
(SATA)
connector
for
tape
v
Support
for
Remote
Supervisor
Adapter
II
SlimLine
Note:
In
messages
and
documentation,
the
term
service
processor
refers
to
the
baseboard
management
controller
or
the
optional
Remote
Supervisor
Adapter
II
SlimLine.
Video
controller:
v
ATI
RN50
video
on
system
board
v
Compatible
with
SVGA
and
VGA
v
16
MB
DDR
video
memory
ServeRAID
SAS
controller:
v
ServeRAID
™
-8k-l
SAS
Controller
that
supports
RAID
levels
0,
1,
10
(standard)
v
Upgradeable
to
ServeRAID-8k
SAS
Controller,
256
MB
with
battery
backup,
that
supports
RAID
levels
0,
1,
1E,
5,
6,
and
10
Environment:
v
Air
temperature:
–
Server
on:
10°
to
35°C
(50.0°
to
95.0°F);
altitude:
0
to
914.4
m
(3000
ft).
Decrease
system
temperature
by
0.75°C
for
every
1000-foot
increase
in
altitude.
–
Server
off:
10°
to
43°C
(50.0°
to
109.4°F);
maximum
altitude:
2133
m
(7000
ft)
–
Shipment:
-40°
to
+60°C
(-40°
to
140°F);
maximum
altitude:
2133
m
(7000
ft)
v
Humidity:
–
Server
on/off:
8%
to
80%
–
Shipment:
5%
to
100%
Acoustical
noise
emissions:
v
Declared
sound
power,
idle:
6.8
bel
v
Declared
sound
power,
operating:
6.8
bel
Heat
output:
Approximate
heat
output
in
British
thermal
units
(Btu)
per
hour:
v
Minimum
configuration:
1230
Btu
per
hour
(360
watts)
v
Maximum
configuration:
3312
Btu
per
hour
(970
watts)
Electrical
input
with
hot-swap
ac
power
supplies:
v
Sine-wave
input
(50-60
Hz)
required
v
Input
voltage
range
automatically
selected
v
Input
voltage
low
range:
–
Minimum:
100
V
ac
–
Maximum:
127
V
ac
v
Input
voltage
high
range:
–
Minimum:
200
V
ac
–
Maximum:
240
V
ac
v
Input
kilovolt-amperes
(kVA)
approximately:
–
Minimum:
0.29
kVA
–
Maximum:
1.00
kVA
4
System
x3650
Type
7979:
User’s
Guide