IBM 7979B1U User Manual - Page 74
compatible
View all IBM 7979B1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
21. Make sure that all cables avoid the fan connectors and the power-backplane system-board connector (see "Power-backplane-board connectors" on page 18 and "System-board internal cable connectors" on page 19). 22. Install the fan-bracket assembly. If you have other optional devices to install or remove, do so now. Otherwise, go to "Completing the installation" on page 81. Installing a SCSI tape drive in a 2.5-inch model server Use these procedures to install a supported SCSI tape drive, such as the IBM DDS Generation 5 Internal Tape Drive, and to connect the tape drive to a supported SCSI adapter in PCI slot 1 of the riser-card assembly. See http://www.ibm.com/ servers/eserver/serverproven/compat/us/ for the list of supported SCSI tape drives and compatible SCSI adapters. Important: Make sure that the type of riser-card assembly (PCI Express or PCI-X) that is installed in the server is compatible with the type of SCSI adapter. The cables for the tape drive come with the tape drive. Hook-and-loop fastener SCSI terminator SCSI signal cable SCSI adapter connector Tape drive connector Signal cable Power cable 58 System x3650 Type 7979: User's Guide