IBM 7979B1U User Manual - Page 59
Installing, Remote, Supervisor, Adapter, SlimLine
View all IBM 7979B1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Access holes Release tabs 5. Disconnect any cables from the adapter. 6. Carefully grasp the adapter by its top edge or upper corners, and pull the adapter from the PCI slot. 7. If you have other optional devices to install or remove, do so now. Otherwise, go to "Completing the installation" on page 81. Installing a Remote Supervisor Adapter II SlimLine An optional Remote Supervisor Adapter II SlimLine can be installed only in a dedicated slot on the system board. See "System-board optional-device connectors" on page 17 for the location of the connector. After the Remote Supervisor Adapter II SlimLine is installed, the systems-management Ethernet port on the rear of the server is active. Note: Earlier versions of the Remote Supervisor Adapter II SlimLine might not work in this server. See http://www.ibm.com/servers/eserver/serverproven/compat/us/ for the supported Remote Supervisor Adapter II SlimLine. Chapter 2. Installing optional devices 43