IBM 86645RY Hardware Maintenance Manual - Page 123
you apply power., seated in the system-board connector before
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Attention Expansion-slot covers must be installed on all vacant slots. This maintains the electromagnetic emissions characteristics of the system and ensures proper cooling of system components. 4. Refer to the documentation that comes with the adapter for any cabling instructions. It might be easier for you to route any cables before you install the adapter. 5. Press on the touchpoint on the adapter retainer flap 4 at the end of the slot nearest the front of the server and rotate the adapter retainer flap upward. 6. Remove the adapter from the static-protective package. Attention Avoid touching the components and gold-edge connectors on the adapter. 7. Place the adapter, component-side up, on a flat, static-protective surface. 8. Set any jumpers or switches as described by the adapter manufacturer. 9. Install the adapter 8 : a. Carefully grasp the adapter 8 by its top edge or upper corners, and align it with the expansion slot on the system board. b. Press the adapter firmly into the expansion slot. Attention When you install an adapter in the server, be sure that it is completely and correctly seated in the system-board connector before you apply power. Incomplete insertion might cause damage to the system board or the adapter. c. Lower the tab 2 on the adapter guide over the tab on the top corner of the adapter. Rotate the adapter retention latch 3 clockwise until it snaps into place. d. Close the adapter retainer flap 4 . 10. Connect any needed cables to the adapter. Attention Route cables so that the flow of air from the fans is not blocked. 11. If you have other options to install or remove, do so now; otherwise, go to "Completing the installation" on page 141. Netfinity 5600 - Type 8664 115