IBM 86645RY Hardware Maintenance Manual - Page 36
System Summary, System Information, Devices and I/O Ports, Product Data, System Card Data
![]() |
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Note The System Configuration Utility main menu selections do not save settings, restore settings, or load default settings for the PCI Slot/Device Information choice. To save settings, or restore settings for the PCI Slot/Device Information choice, you must use the menu selections available from the PCI Slot/Device Information choice. 5. To exit from the System Configuration Utility main menu, select Exit Setup. If you made any changes and did not save them with the Save Settings choice, the system prompts you to save or discard the changes when you attempt to exit from the System Configuration Utility main menu. System Summary: Select this choice to display configuration information, including the type and speed of the microprocessors and amount of memory. Changes that you make to configuration settings appear on this summary screen. You cannot edit the fields. The System Summary choice appears on the full System Configuration Utility main menu and on the limited System Configuration Utility main menu. System Information: Select this choice to display information about the server. Changes that you make on other menus might appear on this summary screen. You cannot edit any fields. The System Information choice appears only on the full System Configuration Utility main menu. Product Data: Select this choice to view system information, such as the machine type and model, the system serial number, and the revision level or issue date of the BIOS stored on the flash electronically erasable programmable ROM (EEPROM). System Card Data: Select this choice to view vital product data (VPD) for some server components. Devices and I/O Ports: Software recognizes ports through their port assignments. Each port must have a unique port assignment. The System Configuration Utility program normally handles this, but you might have special hardware or software that requires you to change these assignments. Select the Devices and I/O Ports choice to view or change the assignments for devices and input/output ports. 28 Netfinity Server HMM
![](/manual_guide/products/ibm-86644ry-hardware-maintenance-manual-70136a6/36.png)