IBM 86645RY Hardware Maintenance Manual - Page 142
that the hard disk drive is installed properly., Check the hard disk drive status indicators to verify
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Attention Do not remove the drive from the tray assembly. 3. Install the hard disk drive in the hot-swap bay: a. Ensure the tray handle is open (that is, perpendicular to the drive). b. Align the drive/tray assembly so that it engages the guide rails in the bay. c. Push the drive assembly into the bay until the drive connects to the backplane. d. Push the tray handle to the right until it locks. 4. Check the hard disk drive status indicators to verify that the hard disk drive is installed properly. See "Status LEDs" on page 195 for details. 5. If the server is a tower model, close and lock the server door. 134 Netfinity Server HMM
Attention
Do not remove the drive from the tray assembly.
3.
Install the hard disk drive in the hot-swap bay:
a.
Ensure the tray handle is open (that is,
perpendicular to the drive).
b.
Align the drive/tray assembly so that it engages
the guide rails in the bay.
c.
Push the drive assembly into the bay until the
drive connects to the backplane.
d.
Push the tray handle to the right until it locks.
4.
Check the hard disk drive status indicators to verify
that the hard disk drive is installed properly.
See
“Status LEDs” on page
195 for details.
5.
If the server is a tower model, close and lock the
server door.
134
Netfinity Server HMM