IBM 86645RY Hardware Maintenance Manual - Page 219
I2C cable to Power, Cable to Power and Reset
![]() |
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Error Code/Symptom 289 (DIMM has been disabled the user or system) 301 (Keyboard or keyboard controller error) 303 (Keyboard controller error) 602 (Invalid diskette boot record) 604 (Diskette drive error) 605 (Unlock failure) 662 (Diskette drive configuration error) 962 (Parallel port error) 11XX (System board serial port 1 or 2 error) 1301 (Cable to Information LED panel not detected. 1302 (Cable to Power and Reset pushbuttons not detected. 1303 (I2C cable to Power Backplane not detected) FRU/Action 1. Run Configuration/Setup, if disabled by user 2. Ensure if a DIMM was added/changed that the power was disconnected. 3. Disabled DIMM, if not disabled by user. 4. Processor Board 1. Keyboard 2. System Board 1. Keyboard 2. System Board 1. Diskette 2. Cable 3. Diskette Drive 1. Run Configuration/Setup and Diagnostics 2. Diskette Drive 3. Drive Cable 4. System Board 1. Diskette Drive 2. Drive Cable 3. System Board 1. Run Configuration/Setup and Diagnostics 2. Diskette Drive 3. Drive Cable 4. System Board 1. Disconnect external cable on parallel port. 2. Run Configuration/Setup 3. System Board 1. Disconnect external cable on serial port. 2. Run Configuration/Setup 3. System Board 1. Cable 1. Cable 1. Cable Netfinity 5600 - Type 8664 211
![](/manual_guide/products/ibm-86644ry-hardware-maintenance-manual-70136a6/219.png)