IBM 86645RY Hardware Maintenance Manual - Page 163
Left front, Left slide rail
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
3. Attach the slide rails to the rack. a. Insert the left slide-rail rear bracket pin into the hole between the two cage nuts for the slide rail at the rear of the rack. The two holes in the rear bracket line up with the cage nuts. b. Pull the slide-rail front bracket to the front of the rack; insert the front bracket pin into the hole above the cage nuts for the slide rail. The two holes in the front bracket line up with the cage nuts. c. Do the same for the other slide rail. 1 Left slide rail 2 Left rear 3 Left front d. From the outside of the rack enclosure, insert two M6 by 16-mm screws through each slide-rail bracket and cage nut; then, tighten the screws. 4. Attach the cable-management arm to the left rear of the rack enclosure. a. Align the cable-management-arm mounting bracket with the cage nuts on the rear mounting rail. b. Insert two M6 by 16-mm screws to secure the mounting bracket to the rack. Netfinity 5600 - Type 8664 155