IBM 86645RY Hardware Maintenance Manual - Page 149
Completing the installation, Completing the tower model installation
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Completing the installation To complete the installation, you must reinstall the cover, reconnect all the cables that you disconnected in "Preparing to install options" on page 100, and, for certain options, run the Configuration/Setup Utility program. Follow the instructions in this section. If you have a tower model, continue with "Completing the tower model installation." If you have a rack model, go to "Completing the rack model installation" on page 144. Completing the tower model installation: To complete the installation for the tower model: 1. Install the left-side cover, if it was removed. 2. Install the trim bezel, if it was removed. 3. Install the server door, if it was removed. 4. Restart the server. 5. Update device records and reconfigure the server (see "Updating device records and reconfiguring the server" on page 60). To install the server left-side cover: CPU VRM PCI MBUESMORY A B POWER 1 2 SUPPLY 3 FAN 1 2 3 HDD NMI SMI SBNUEORSNVRICEEDUPRNODACNETSSOR TEMPERATURE 1 Slots 2 Left-side cover a. Align the left-side cover 2 with the left side of the server, about 25 mm (1 inch) from the front of the server; place the bottom of the left-side cover on the bottom rail of the left-side side of the chassis. b. Insert the tabs at the top of the cover into the slots 1 at the top of the server side. Netfinity 5600 - Type 8664 141