IBM 86645RY Hardware Maintenance Manual - Page 217
POST error codes, Error Code/Symptom, FRU/Action, Configuration/Setup, Processor Board, Memory DIMM
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
POST error codes In the following error codes, X can be any number or letter. Error Code/Symptom 062 (Three consecutive boot failures using the default configuration.) 101, 102 (System and processor error) 106 (System and processor error) 111 (Channel check error) 114 (Adapter read-only memory error) 129 (Internal Cache error) 151 (Real time clock error) 161 (Real time clock battery error) 162 (Device Configuration Error) Important Be sure to load the default settings and any additional desired settings; then, save the configuration. FRU/Action 1. Run Configuration/Setup 2. Battery 3. Processor Board 4. System Board 1. Processor Board 2. System Board 1. Processor Board 2. System Board 1. Memory DIMM 2. Processor Board 3. System Board 1. Failing Adapter 2. Run Diagnostics 1. Processor 2. Optional Processor (if installed) 3. Processor Board 1. Run Diagnostics 2. Battery 3. System Board 1. Run Configuration/Setup 2. Battery 3. System Board 1. Run Configuration/Setup 2. Battery 3. Failing Device 4. System Board 163 (Real-Time Clock error) 164 (Memory configuration changed) 173 (System CMOS checksum bad) 1. Run Configuration/Setup 2. Battery 3. System Board 1. Run Configuration/Setup 2. DIMM 3. Processor Board 1. Run Configuration/Setup 2. Battery 3. System Board Netfinity 5600 - Type 8664 209