IBM 86645RY Hardware Maintenance Manual - Page 196
arm to the rear of the left slide rail, using a hitch, Attach the free end of the cable-management
![]() |
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
bracket and cage nuts; then, finger-tighten the screws. 4. Attach the cable-management arm to the left rear of the rack enclosure. a. Align the cable-management-arm mounting bracket with the cage nuts on the rear mounting rail. b. Insert two M6 by 16-mm screws to secure the mounting bracket to the rack. 1 Right rear 2 Left rear 3 Right front 4 Left front 5 Hitch pin c. Attach the free end of the cable-management arm to the rear of the left slide rail, using a hitch pin 5 . Installing the server: Complete the following procedure to install the server into the rack enclosure. 1. Mount the server on the slide rails. a. Attach the large wheel-shaped knobs 1 to the sides of the server, near the rear of the server. 188 Netfinity Server HMM
![](/manual_guide/products/ibm-86644ry-hardware-maintenance-manual-70136a6/196.png)
bracket and cage nuts; then, finger-tighten the
screws.
4.
Attach the cable-management arm to the left rear of
the rack enclosure.
a.
Align the cable-management-arm mounting
bracket with the cage nuts on the rear mounting
rail.
b.
Insert two M6 by 16-mm screws to secure the
mounting bracket to the rack.
±1²
Right rear
±2²
Left rear
±3²
Right front
±4²
Left front
±5²
Hitch pin
c.
Attach the free end of the cable-management
arm to the rear of the left slide rail, using a hitch
pin
±5²
.
Installing the server:
Complete the following
procedure to install the server into the rack enclosure.
1.
Mount the server on the slide rails.
a.
Attach the large wheel-shaped knobs
±1²
to the
sides of the server, near the rear of the server.
188
Netfinity Server HMM