IBM 86645RY Hardware Maintenance Manual - Page 81
Establishing a Direct Connection to the, Netfinity Advanced System Management, Processor
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Establishing a Direct Connection to the Netfinity Advanced System Management Processor: To use a terminal program to establish a direct connection with the Netfinity Advanced System Management processor: 1. Use a terminal program to establish a connection with the Netfinity Advanced System Management processor modem. Use the following modem settings: Baud 57.6 k Data Bits 8 Parity None Stop Bits 1 Flow Control Hardware 2. Dial the Netfinity Advanced System Management processor. 3. Log in to the Netfinity Advanced System Management processor. When you have established a connection with the Netfinity Advanced System Management processor, you will be prompted for a user name and password. You must provide a user name and password combination that has been previously configured for use with the Netfinity Advanced System Management processor. You can use one of two user name and password combinations: The default user name (USERID) and password (PASSW0RD) Note The default user name and password are case sensitive. You must use ALL CAPS, and the "0" in PASSW0RD is the numeral zero. A user name and password that you define using the Netfinity Advanced System Management processor and Netfinity Manager Important For security purposes, change the user name and password using the Netfinity Advanced System Management processor. If you update the Netfinity Advanced System Management processor microcode, the default user name (USERID) and password (PASSW0RD) are reset. If you had previously changed them, you will need to change them again. Netfinity 5600 - Type 8664 73