IBM 86645RY Hardware Maintenance Manual - Page 183
Installing the conversion kit on the server, Before You Begin, Caution
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Installing the conversion kit on the server Before You Begin Read through these instructions to familiarize yourself with the installation procedure. Read "Safety information" on page 230. Note The illustrations in this publication might be slightly different from your hardware. 32 kg (70.5 lbs) 55 kg (121.2 lbs) Caution Use safe lifting practices when lifting your machine. Complete the following procedure to install the conversion kit on the server. 1. Prepare the server for conversion. a. Shut down the server operating system. b. Unlock the server door and open it by pulling on the door edge next to the lock. c. If desired, remove the server door. 1) Locate the flange on the top edge of the front door, near the hinge. 2) Press the flange downward while pulling the door forward or pressing out on the door; then, lift the door off the hinge. Set the door aside. Netfinity 5600 - Type 8664 175