IBM 86645RY Hardware Maintenance Manual - Page 210

Diagnostic error codes Attention In the following error codes, if XXX is 000, 195, or 197 do not replace a FRU. The description for these error codes are: 000 The test passed. 195 The Esc key was pressed to abort the test. 197 This a warning error and may not indicate a hardware failure. For all other error codes, replace/follow the FRU/Action indicated. Error Code/Symptom 001-XXX-000 (Failed core tests) 001-250-001 (Failed ECC test) 005-XXX-000 (Failed Video test) 011-XXX-000 (Failed COM1 Serial Port test) 011-XXX-001 (Failed COM2 Serial Port test) 014-XXX-000 (Failed Parallel Port test) 015-XXX-001 (Failed USB test) 020-XXX-000 (Failed PCI Interface test) 030-XXX-000 (Failed internal SCSI interface test) 030-XXX-00N (Failed SCSI test on PCI slot N. Check system error log before replacing a FRU.) 035-XXX-099 (No adapters were found) 035-XXX-199 (Failed RAID test on PCI slot 1. Check system error log before replacing a FRU.) FRU/Action 1. System Board 1. Processor Board 2. System Board 1. System Board 2. Processor Board 1. System Board 1. System Board 1. System Board 1. System Board 1. System Board 2. Processor Board 1. System Board 1. Adapter on PCI slot N 1. If adapter is installed, recheck connections 1. Adapter 2. SCSI Backplane 3. Cable 202 Netfinity Server HMM