IBM 86645RY Hardware Maintenance Manual - Page 176
System board jumpers, Table 10. System board jumper J20
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
System board jumpers Table 10 describes the jumpers on the system board. The numbers in the table correspond to the highlighted numbers on the illustration in "System board component locations" on page 166. Note Turn off the server, and disconnect the power cords before moving any jumpers. The following illustration shows pin positions for the system board jumper J20. Pin 1 is the pin at the upper-left corner of J20 in the illustration of the system board in "System board component locations" on page 166. 1 23 4 6 7 9 10 11 12 Table 10. System board jumper (J20) Jumper Pin Positions Pins 1-3 (N/A) Pins 4-6 (N/A) Pins 7-9 Pins 10-12 (N/A) Description The default is no jumper on pins 1 , 2, and 3. The default is a jumper on pins 5 and 6. The default is a jumper on pins 8 and 9 ASM enabled (pins 7-8 ASM disabled). The default is a jumper on pins 10 and 11. 168 Netfinity Server HMM