IBM 86645RY Hardware Maintenance Manual - Page 201
IBM Netfinity 5600 Hot-Plug SCSI Setup, Utility, Save Settings, Exit Setup, Important
![]() |
View all IBM 86645RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
e. Press Esc to return to the main configuration utility menu. f. Select Save Settings; then select Exit Setup. 9. Insert the IBM Netfinity 5600 Hot-Plug SCSI Setup Utility diskette in diskette drive a: and restart the system. Important 1. Only run this utility if you are installing this kit on a Netfinity 5600 server. 2. Failure to run this utility on a Netfinity 5600 server will result in the SCSI drive order being reported incorrectly. Failure to run this utility can also cause a loss of data. 3. Complete all other steps in this installation procedure before running the utility. The utility on the diskette starts automatically and updates the drive order of the SCSI IDs for reporting purposes. A progress indicator displays during both stages of the utility (up to three minutes), followed by a message that indicates successful or unsuccessful completion of the utility. a. If the utility did not complete successfully, restart the server to retry the utility. b. If the utility completed successfully, remove the diskette, turn off the server, disconnnect all power cords, wait 60 seconds, reconnect all power cords, and restart the server. The tower-to-rack conversion is complete. Netfinity 5600 - Type 8664 193
![](/manual_guide/products/ibm-86644ry-hardware-maintenance-manual-70136a6/201.png)