Icom ID-880H Instruction Manual - Page 103
Alarm area 2
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
6 GPS/GPS-A OPERATION D Alarm area 2 Selects GPS alarm active range from "BOTH," "EXTEND" and "LIMIT" when "CH" or "RX" is selected at GPS alarm setting. q Enter "ALM2" in GPS mode. MENU ¶ GPS ¶ ALM2 (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) • ALM2 setting screen is displayed. • Example: Your position 1 2 Extended range 3 (approx. 1 km; 1094 Y) 4 5 6 Limited range 7 (approx. 500 m; 547 Y) 8 wRotate [DIAL] to select the desired alarm setting, then push [ ](MONI) to set. The target position definitions for Alarm area 2. 9 • BOTH : GPS alarm† will sound when a target position enters both 500 m* (547 Y)* and 1 km* (1094 Y)* range. (default) • EXTEND : GPS alarm‡ will sound when a target position enters 1 km* (1094 Y)* range. • LIMITE : GPS alarm‡ will sound when a target position enters 500 m* (547 Y)* range. *Approximate † One beep sounds when coming within 1 km (1094 Y) and three beep sounds when coming within 500 m (547 Y). ‡ Three beep sounds. e Push [MENU ] to return to frequency indication. 10 Alarm indication 11 When a target position comes into the alarm area, below indication appears. 12 Appears 13 14 15 Shows above indications alternately. 16 • Push any key to return to frequency indication, but "S" indica- 17 tor continues to blink in the area. 18 19 85