Icom ID-880H Instruction Manual - Page 160
Dtmf Memory Encoder
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
11 DTMF MEMORY ENCODER Programming a DTMF tone sequence DTMF tone sequences are used for autopatching, accessing repeaters, controlling other equipment, etc. The transceiver has 16 DTMF memory channels (d0-d9, dA, dB, dC, dD, dE, dF) for storage of often-used DTMF tone sequences of up to 24 digits. q Push and hold [DTMF](MONI) for 1 sec. to enter the DTMF set screen. w Rotate [DIAL] to select "DTMF-M," then push [ ](MONI). e Rotate [DIAL] to select the desired memory channel, then push [ ](MONI). • Previously programmed DTMF code is displayed if pro- grammed. r Rotate [DIAL] to select the desired code. t Push [ ](LOW) to select the next digit. • Pushing [ ](CS) moves the cursor backward. y Repeat steps r and t until the desired DTMF tone se- quence is input, then push [ ](MONI). • Up to 24 digit can be programmed. u Push [ ](MONI) to program the DTMF tone sequence and exit the programming mode. i Push [MENU ] to exit the DTMF set screen. [EXAMPLE]: Programming "5428AB453" into DTMF memory channel "d4." [MENU ] [DIAL] [DTMF] Push and hold [DTMF] for 1 sec. Rotate [DIAL] to select "DTMF-M," then push [ ]. [] [] [ ] Enter DTMF memory. Rotate [DIAL] to select the desired code, then push []. Rotate [DIAL] to select "d4," then push [ ]. Push [ ], then push [MENU ]. Repeat the previous step until the desired tone sequence is entered. 142