Icom ID-880H Instruction Manual - Page 80
Calling CQ in another zone Different zone CQ
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
5 DV MODE OPERATION D Calling CQ in another zone (Different zone CQ) q Set the desired repeater's frequency, offset and shift direction (pgs. 14, 15, 23, 27), then select the DV mode (p. 18). w Set the current MY call sign to your own call sign. • See pgs. 42, 43 for current call sign setting detail. e Set the current station call sign and repeater call signs as follows: z Push [CS] to enter the current call sign mode. • UR call sign is displayed. • Push [M/CALL] to toggle the call sign and repeater name indications. x Push [ ](MONI) to enter the current call sign selection mode. c Rotate [DIAL] to select the desired repeater call sign, then push [ ](MONI) to set the call sign for "UR." • Return to the current call sign mode. v Rotate [DIAL] to select "R1," access repeater's call sign, then push [ ](MONI) to enter the current call sign selection mode. b Rotate [DIAL] to select the desired access repeater's call sign, then push [ ](MONI) to set the call sign for "RPT1." • Return to the current call sign mode. n Rotate [DIAL] to select "R2," linked repeater's call sign, then push [ ](MONI) to enter the current call sign selection mode. • "RPT2" call sign screen is displayed. m Rotate [DIAL] to select the specified gateway repeater call sign in the same zone, then push [ ](MONI). • Return to the current call sign mode. , Push [MENU ] to return to frequency indication. r Push [PTT] to transmit; release to receive. • UR call sign is displayed and scrolled in sequence on the frequency display depending on "TX CS" setting (p. 136). • Current call sign setting example q w Area My call signɿ JA3YUA Zone B Zone A e r Gateway Repeater qɿJP3YHL Repeater eɿJP3YHH G Repeater uɿJP1YIU CQ t y u i Gateway UR MY R1 R2 Pushing and holding [BAND] for 1 sec. selects the repeater group when in selection mode. 62