Icom ID-880H Instruction Manual - Page 86

Break-in communication

Page 86 highlights

5 DV MODE OPERATION Break-in communication The break-in function allows you to break into a conversation, where the two original stations are communicating with call sign squelch enabled. q While receiving an another station's communication, push and hold [RX©CS](CS) for 1 sec. to set the communicating station's call sign. • When a call sign has not been received correctly, error beeps sound and no call sign is set. Try to set the call sign of a communicating signal again, or set the call sign manually. w Enter "BK" in the DV SET mode. MENU ¶ DV SET ¶ BK (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) • BK screen is displayed. e Rotate [DIAL] to turn the Break-in function ON or OFF. • When "ON" is selected, "BK" appears instead of memory channel indication r Push [ ](MONI). • Returns to the DV SET mode. t Push [MENU ] to return to frequency indication. "BK" appears y When both stations are in standby, push [PTT] to transmit a break-in call. • The programmed call sign station receives the break-in call as well as your call sign. u Wait for the reply call from the station who receives the break-in call. i After receiving the reply call, communicate normally. o To cancel the break-in function, turn the Break-in function OFF in the DV SET mode as steps w to t. NOTE: The break-in function is turned OFF automatically when turning transceiver's power OFF 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

68
5
DV MODE OPERATION
±
Break-in communication
The break-in function allows you to break into a conversa-
tion, where the two original stations are communicating with
call sign squelch enabled.
q
While receiving an another station’s communication, push
and hold
[RX CS]
(CS) for 1 sec. to set the communicating
station’s call sign.
When a call sign has not been received correctly, error beeps
sound and no call sign is set. Try to set the call sign of a com-
municating signal again, or set the call sign manually.
w
Enter “BK” in the DV SET mode.
MENU
DV SET
BK
(Push
[MENU
]
), (rotate
[DIAL]
, then push
[
]
(MONI).)
• BK screen is displayed.
e
Rotate
[DIAL]
to turn the Break-in function ON or OFF.
When "ON" is selected, “BK” appears instead of memory chan-
nel indication
r
Push
[
]
(MONI).
• Returns to the DV SET mode.
t
Push
[MENU
]
to return to frequency indication.
“BK” appears
y
When both stations are in standby, push
[PTT]
to transmit
a break-in call.
The programmed call sign station receives the break-in call as
well as your call sign.
u
Wait for the reply call from the station who receives the
break-in call.
i
After receiving the reply call, communicate normally.
o
To cancel the break-in function, turn the Break-in function
OFF in the DV SET mode as steps
w
to
t
.
NOTE:
The break-in function is turned OFF automatically
when turning transceiver’s power OFF