Icom ID-880H Instruction Manual - Page 41
Accessing a repeater
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
REPEATER OPERATION 3 Accessing a repeater q Set the receive frequency (repeater output frequency). (pgs. 14, 15) w Push and hold [DUP](LOW) for 1 sec. to enter the duplex setting condition. e Rotate [DIAL] to select minus duplex or plus duplex. • "DUP-" or "DUP" appears to indicate the transmit frequency for minus shift or plus shift, respectively. • When the auto repeater function is turned ON (available for the USA version only), steps w to t are not necessary. (p. 28) • Push [DUP](LOW) again to return to the frequency indication. "DUP-" or "DUP" appears "T" appears 3 [TONE] y Push and hold [PTT] to transmit. • The displayed frequency automatically changes to the transmit frequency (repeater input frequency). • If "OFF" appears, confirm that the frequency offset (p. 27) is set correctly. u Release [PTT] to receive. [DUP] r Push and hold [TONE](M/CALL) for 1 sec. to enter the tone setting condition. t Rotate [DIAL] to turn ON the subaudible tone encoder, according to repeater requirements, then push [TONE](M/CALL). • "T" appears • 88.5 Hz is set as the default; refer to p. 25 for tone frequency settings. • When the repeater requires a different tone system, see p. 26. While receiving While transmitting i Push [MONI] to check whether the other station's transmit signal can be received directly. o To return to simplex operation, push and hold [DUP](LOW) then rotate [DIAL], to clear the "DUP-" or "DUP" indicator. • Push [DUP](LOW) again to return to frequency indication. !0 To turn OFF the subaudible tone encoder, push and hold [TONE](M/CALL) then rotate [DIAL] until no tone indicator (OFF) appears. • Push [TONE](M/CALL) again to return to the frequency indication. 23