Icom ID-880H Instruction Manual - Page 175
Auto power OFF, Time-out timer, Packet operation
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
OTHER FUNCTIONS 13 Auto power OFF The transceiver can be set to automatically turn OFF after a specified period with a beep when no switch is pushed. 120 min., 90 min., 60 min., 30 min. and OFF can be specified. The specified period is retained even when the transceiver is turned OFF by the auto power-off function. To cancel the function, select "OFF" in the auto power-off item in set mode. This can be selected with "AP OFF" in the FUNC set mode (SET). MENU ¶ SET ¶ FUNC ¶ AP OFF (p. 130) (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) Time-out timer To prevent accidental prolonged transmission, etc., the transceiver has a time-out timer. This timer cuts a transmission OFF after 1, 3, 5, 10, 15 or 30 min. of continuous transmission. This timer can be cancelled (default). Approx. 10 sec. before the time-out timer is activated, the transceiver emits a beep tone as a warning. This can be selected with "TOT" in the FUNC set mode (SET). MENU ¶ SET ¶ FUNC ¶ TOT (p. 128) (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) Packet operation 1 D Data speed 2 For packet operation, the transceiver can be set to one of 3 two data speeds: 1200 bps (default) or 9600 bps. 4 q Enter "PACKET" in the FUNC set mode (SET). MENU ¶ SET ¶ FUNC ¶ PACKET (p. 129) 5 (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) 6 7 8 [MENU ] [DIAL] [ ] 9 w Rotate [DIAL] to select the desired data transmission 10 speed from 1200 bps (default) and 9600 bps, then push [ ](MONI). 11 e Push [MENU ] to exit the FUNC set mode. 12 • The microphone signal is automatically cut. Therefore, it 13 is not necessary to disconnect the microphone plug from 14 the connector in this case. • When pushing [PTT] during data transmission, data 15 transmission is interrupted and voice signals have 16 priority. 17 18 19 157