Icom ID-880H Instruction Manual - Page 57
Repeater name programming R-NAME, Repeater call sign programming CALL S
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
DV MODE PROGRAMMING 4 Repeater name programming (R-NAME) q Push [ ](MONI) to enter the repeater name programming state. • Repeater name programming screen is displayed. • The 1st digit blinks. w Rotate [DIAL] to select the desired character, number, symbol or space. • The selected character blinks. • Push [ ](LOW) to move the cursor right; push [ ](CS) to move the cursor left. • Push [CLR](DR) to erase the selected character, or push and hold [CLR](DR) for 1 sec. to erase all characters following the cursor. e Repeat step w until the desired repeater name is programmed. • Up to an 8 digit name can be set. r Push [ ](MONI) to program the repeater name and exit the state. Repeater call sign programming (CALL S) 1 q Push [ ](MONI) to enter the repeater call sign programming state. 2 • Repeater call sign programming screen is displayed. 3 • The 1st digit blinks. 4 5 6 w Rotate [DIAL] to select the desired character, number or symbol ('/' only). 7 • The selected character blinks. 8 • Push [ ](LOW) to move the cursor right; push [ ](CS) to move the cursor left. 9 • Push [CLR](DR) to erase the selected character, or push and 10 hold [CLR](DR) for 1 sec. to erase all characters following the cursor. 11 12 13 e Repeat step w until the desired repeater call sign is pro- 14 grammed. 15 • Call sign can be up to 8 digits long. r Push [ ](MONI) to program the repeater call sign and exit 16 the state. 17 18 19 39