Icom ID-880H Instruction Manual - Page 110

7 MEMORY/CALL CHANNELS Memory bank setting The ID-880H has a total of 26 banks (A to Z). Regular memory channels, 0 to 999, are assigned to any desired bank for easy memory management. q Push [S.MW] to enter the select memory write mode. • "X" indicator and the memory channel number blink. w Rotate [DIAL] to select the desired memory channel. e Push [ ](MONI) to select "BANK" setting. r Push [ ](MONI) again. • Bank group and channel number are displayed if the selected memory channel has already been assigned to a bank. t Rotate [DIAL] to select the desired bank group from "A" to "Z." [DIAL] y Push [ ](LOW) to select the bank channel digit, then rotate [DIAL] to select the bank channel number from "00" to "99." • Push [ ](CS) to return to the bank group selection, if desired. [DIAL] [S.MW ] [ ] Push [ ] Push [ ] 92 [DIAL Rotate [DIAL] u Push [ ](MONI) to set the bank initial and channel number. i Push and hold [MW](S.MW) for 1 sec. to assign the channel to the bank. • Return to the previous indication before entering the select memory write mode.