Icom ID-880H Instruction Manual - Page 106
Selecting a memory channel
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
7 MEMORY/CALL CHANNELS Selecting a memory channel D Using the tuning dial q Push [M/CALL] several times to select the memory mode. • "X" indicator appears. w Rotate [DIAL] to select the desired memory channel. • Only programmed memory channels can be selected. Appears [DIAL] [M/CALL] D Using the [Y]/[Z] keys z Push [MR/CALL] to select the memory MR/CALL mode. x Push [Y] or [Z] to select and set the desired 2/3 memory channel. • Pushing and holding [Y]/[Z] for 1 sec. activates a scan. • If scan is activated, push [Y]/[Z] again or push [CLR A(MW)] to stop it. D Using the keypad z Push [MR/CALL] to select the memory MR/CALL mode. x Push [ENT C(T-OFF)] to activate the keypad ENT for numeral input. C c Push 3 appropriate digit keys to input a chan- nel number. • Blank channel can be selected. • Push only 1 or 2 appropriate digit key(s), [VOLY 0(TONE-2)] to [SIMP 9(16-KEY-L)] then push [VOLZ M(TONE-1)] or [SQLZ #(16KEY-L)] to select scan edge channels. "M" and "#" can be used for "A" and "B" respectively. 88