Icom ID-880H Instruction Manual - Page 32
Using the tuning dial, Using
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2 BASIC OPERATION Using the tuning dial q Rotate [DIAL] to set the frequency. • If the VFO mode is not selected, push [VFO/MHz] to select the VFO mode. • The frequency changes in the selected tuning steps. (p. 15) w To change the frequency in 10 MHz (or 1 MHz) steps, push [VFO/MHz] once or twice, then rotate [DIAL]. Push [VFO/MHz] again. • Pushing and holding [VFO/MHz] for 1 sec. starts scan function. If scan starts, push [VFO/MHz] again to cancel it. Using the [Y]/[Z] keys ± Push [Y] or [Z] to select the desired frequency. YZ • Pushing and holding [Y]/[Z] for 1 sec. activates a scan. If scan starts, push [Y]/[Z] or [CLR A(MW)] to cancel it. [DIAL] [VFO/MHz] While 10 MHz tuning step is selected, the digits below 1 MHz disappear. While 1 MHz tuning step is selected, the digits below 100kHz disappear. 14