Icom ID-880H Instruction Manual - Page 172
All reset, Partial reset
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
13 OTHER FUNCTIONS All reset AT POWER ON The function display may occasionally display erroneous information (e.g. when first applying power). This may be caused externally by static electricity or by other factors. If this problem occurs, turn power OFF. After waiting a few seconds, turn power ON again. If the problem persists, perform the following procedure. • Partial reset is also available. See right for details. IMPORTANT!: Resetting the CPU CLEARS all programmed contents to the their default settings. q Push and hold [ ] for 1 sec. to turn power OFF. w Push and hold simultaneously [MENU ] and [S.MW], then turn power ON to reset the CPU. [MENU ] Partial reset AT POWER ON If you want to initialize the operating conditions (VFO frequency, VFO settings, menu group's contents) without clearing the memory contents, call sign memories or repeater lists, a partial reset function is available. q Push and hold [ ] for 1 sec. to turn power OFF. w Push and hold simultaneously [S.MW] and [VFO/MHz], then turn power ON to reset the CPU. [S.MW] [VFO/MHz] [S.MW] 154 After resetting, the displayed frequency depends on versions.