Icom ID-880H Instruction Manual - Page 31
Call/Weather* channels, DR D-STAR Repeater mode - d star programming
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
BASIC OPERATION 2 D Call/Weather* channels Call channels are used for quick recall of most-often used frequencies. *Weather channels are available depending on versions. q Push [M/CALL] several times to select call channels/ Weather channels. • Memory/Call/Weather channels can be selected in sequence. • "C0" or "C1" appears when call channel is selected. w Rotate [DIAL] to select the desired channel. • Call channel indication [M/CALL] • Weather channel indication MR/CALL Y/Z z Push and hold [MR/CALL] for 1 sec. to select the call channels. • Weather channels cannot be selected by the HM-133. x Push [ ] or [ ] to select the desired call channel. 1 D DR (D-STAR Repeater) mode 2 DR (D-STAR Repeater) mode is used for D-STAR repeater 3 operation. In this mode, you can select the pre-programmed repeaters and UR call sign easily. 4 q Push [DR] to select the DR mode. 5 • " " appears when the DR mode is selected. 6 • DR mode indication 7 8 9 [DR] Appear 10 w Rotate [DIAL] to select the desired access repeater. 11 • While rotating [DIAL], S/RF meter indicates group number. • Only programmed access repeaters in RPT-L menu can be se- 12 lected. See p. 34 for RPT-L (repeater lists) programming details. 13 MENU ¶RPT-L ¶ADD-L (p. 34) 14 NOTE: If All reset is performed, "NO RPT" indication ap- 15 pears. In this case, you should program the repeater list 16 before operating the DR mode. 17 18 19 13