Icom ID-880H Instruction Manual - Page 126
Skip channel/frequency setting
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
8 SCAN OPERATION Skip channel/frequency setting Memory channels can be set to be skipped during memory skip scan. In addition, memory channels can be set to be skipped during both memory skip scan and frequency skip scan. This is useful to speed up the scan rate. r Rotate [DIAL] to select "SKIP," then push [ ](MONI). q Select a memory channel: ± Push [M/CALL] to select the memory mode. ± Rotate [DIAL] to select the desired channel to be a skip channel/frequency. Rotate [DIAL] Push [ ] [DIAL][M/CALL] wPush [S.MW](MW) to enter the select memory write mode. • "X" indicator and the memory channel number blink. e Push [ ](MONI). [S.MW ] [DIAL] [ ] t Rotate [DIAL] to select the skip condition from "SKIP," "PSKIP" or "OFF" for the selected channel. • PSKIP : The channel is skipped during memory/bank scan and the programmed frequency is skipped during VFO scan, such as programmed scan. • SKIP : The channel is skipped during memory or bank scan. • OFF : The channel is scanned during any scan. y Push [ ](MONI), then push and hold [MW](S.MW) for 1 sec. to store the skip condition into the memory. • " " or " " appears, according to the skip selection in the step y. " " appears " " appears Skip channel setting Program skip setting 108