Icom ID-880H Instruction Manual - Page 180
Weather channel operation
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
13 OTHER FUNCTIONS Weather channel operation D Weather channel selection q Push [M/CALL] several times to select weather channel group. [M/CALL] Weather channel group indicaiton w Rotate [DIAL] to select the desired weather channel. e Push [M/CALL] to select the memory mode, or push [VFO/ MHz] to select the VFO mode. Push and hold [SCAN](VFO/MHz) for 1 sec. activates the weather channel scan. Push [SCAN](VFO/MHz) again to stop the scan. USA/CHN/EXP versions only D Weather alert function NOAA broadcast stations transmit weather alert tones before important weather announcements. When the weather alert function is turned ON, the selected weather channel is monitored every 5 sec. so you can hear weather announcements. When the alert signal is detected, the "ALT" and the WX channel indications are displayed alternately and a beep sounds until the transceiver is operated. The previously selected (used) weather channel is checked periodically during standby or while scanning. q Select the desired weather channel. w Enter "WX-ALT" in the SCAN set mode. MENU ¶ SCAN ¶ WX-ALT (p. 63) (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) e Rotate [DIAL] to select "ON" or "OFF." rPush [ ](MONI) to return to the SCAN set mode, and push [MENU ] to return to the weather channel indication. t Sets the desired stand-by condition. • Selects the VFO, memory or call channel. • Scan or priority watch operation can also be selected. 162